Jason b3b4580e9c xdc(200t): pin AD9484 OR LVDS pair to U20/V20 (L11_T1_SRCC_14) ...

Closes AUDIT-C15. The 200T XDC `adc_or_p/n` PACKAGE_PIN was a TODO
placeholder that blocked all 200T synth/impl with unplaced-IO errors.

Pins U20/V20 are L11P/L11N_T1_SRCC_14 — same T1 clock tile as adc_dco_p
on L12_MRCC (W19/W20), so OR captures with the same IBUFDS->BUFIO->IDDR
source-synchronous topology as adc_d_p[*]. Free-pair confirmed by Vivado
get_package_pins query against xc7a200tfbg484-2.

Adds DIFF_TERM TRUE on adc_or_n (was only on the p-side; explicit on
both is safer). Adds input_delay constraints mirroring adc_d_p
(max 1.0 ns / min 0.2 ns on both edges).

Header pin counts updated: Bank 14 21/50 used, total 184/285.

This is the FPGA-team RECOMMENDATION for the production PCB (NEW
design); the PCB designer must route AD9484 OR+ -> U20 and OR- -> V20.

Validation:
- read_xdc + link_design -part xc7a200tfbg484-2 -> READ OK on both
  xc7a200t_fbg484.xdc and adc_clk_mmcm.xdc; no PACKAGE_PIN errors.
- ./run_regression.sh --quick: 29/29 PASS (RTL untouched).

2026-04-29 16:01:04 +05:45

..

constraints

xdc(200t): pin AD9484 OR LVDS pair to U20/V20 (L11_T1_SRCC_14)

2026-04-29 16:01:04 +05:45

formal

…

ip/xfft_2048_ip

feat(fpga): swap matched-filter chain to Xilinx LogiCORE FFT v9.1 IP

2026-04-23 12:39:33 +05:45

scripts

chore: delete dead latency_buffer; doc cleanup for two stale comments

2026-04-28 12:52:13 +05:45

tb

fix(fpga): C-3 — parameterize DDC ADC sign-conversion via host opcode 0x33

2026-04-29 14:18:25 +05:45

.gitignore

feat(fpga): swap matched-filter chain to Xilinx LogiCORE FFT v9.1 IP

2026-04-23 12:39:33 +05:45

ad9484_interface_400m.v

fix(fpga): pre-bringup RTL hardening + test-suite hardening

2026-04-22 13:23:38 +05:45

adc_clk_mmcm_integration.md

…

adc_clk_mmcm.v

…

cdc_modules.v

fix(pre-bringup): second-batch P1/P2/P3 audit findings

2026-04-20 14:28:22 +05:45

cfar_ca.v

fix(radar): RX chain corrections, GUI bin alignment, MCU boot ordering

2026-04-23 05:56:52 +05:45

chirp_memory_loader_param.v

feat(fpga): integrate 2048-pt FFT upgrade — non-conflicting RTL (wave 1/3)

2026-04-21 01:52:32 +05:45

cic_decimator_4x_enhanced.v

perf(fpga): move CIC comb stages to fabric — 80→70 DSPs (-10)

2026-04-23 11:32:03 +05:45

dac_interface_single.v

…

ddc_400m.v

fix(fpga): C-3 — parameterize DDC ADC sign-conversion via host opcode 0x33

2026-04-29 14:18:25 +05:45

ddc_input_interface.v

…

doppler_processor.v

fix(radar): RX chain corrections, GUI bin alignment, MCU boot ordering

2026-04-23 05:56:52 +05:45

edge_detector.v

…

fft_engine_axi_bridge.v

feat(fpga): swap matched-filter chain to Xilinx LogiCORE FFT v9.1 IP

2026-04-23 12:39:33 +05:45

fft_engine.v

feat(fpga): integrate 2048-pt FFT upgrade — non-conflicting RTL (wave 1/3)

2026-04-21 01:52:32 +05:45

fft_twiddle_16.mem

…

fft_twiddle_1024.mem

…

fft_twiddle_2048.mem

feat(fpga): integrate 2048-pt FFT upgrade — non-conflicting RTL (wave 1/3)

2026-04-21 01:52:32 +05:45

fir_lowpass.v

perf(fpga): symmetric pre-adder FIR — 32→16 DSPs/channel (-32 total)

2026-04-23 10:08:19 +05:45

fpga_self_test.v

…

frequency_matched_filter.v

…

long_chirp_lut.mem

…

long_chirp_seg0_i.mem

fix(fpga): TX-I — align matched-filter reference with actual post-DDC band

2026-04-29 11:41:19 +05:45

long_chirp_seg0_q.mem

fix(fpga): TX-I — align matched-filter reference with actual post-DDC band

2026-04-29 11:41:19 +05:45

long_chirp_seg1_i.mem

fix(fpga): TX-I — align matched-filter reference with actual post-DDC band

2026-04-29 11:41:19 +05:45

long_chirp_seg1_q.mem

fix(fpga): TX-I — align matched-filter reference with actual post-DDC band

2026-04-29 11:41:19 +05:45

matched_filter_multi_segment.v

cleanup(fpga): RX-A1 — drop dead chirp_counter port from MF chain

2026-04-27 14:06:55 +05:45

matched_filter_processing_chain.v

cleanup(fpga): RX-A1 — drop dead chirp_counter port from MF chain

2026-04-27 14:06:55 +05:45

mti_canceller.v

fix(fpga): RX-F — MTI exits mute on chirp boundary, not just last bin

2026-04-23 19:58:08 +05:45

nco_400m_enhanced.v

fix(fpga): registered reset fan-out at 400 MHz; default USB to FT2232H

2026-04-18 20:34:52 +05:45

plfm_chirp_controller.v

fix(fpga): TX-I — align matched-filter reference with actual post-DDC band

2026-04-29 11:41:19 +05:45

radar_mode_controller.v

feat(fpga): integrate 2048-pt FFT upgrade — non-conflicting RTL (wave 1/3)

2026-04-21 01:52:32 +05:45

radar_params.vh

feat(fpga): integrate 2048-pt FFT upgrade — non-conflicting RTL (wave 1/3)

2026-04-21 01:52:32 +05:45

radar_receiver_final.v

fix(fpga): C-3 — parameterize DDC ADC sign-conversion via host opcode 0x33

2026-04-29 14:18:25 +05:45

radar_system_top_50t.v

Revert "fix(fpga): move IBUF+BUFIO+BUFR into 50T wrapper (same scope as pad)"

2026-04-20 21:47:19 +05:45

radar_system_top_te0712_dev.v

…

radar_system_top_te0713_dev.v

…

radar_system_top_te0713_umft601x_dev.v

…

radar_system_top.v

fix(usb): C-9 — GUI bulk-frame parser for FT2232H + clamp inert flag bits

2026-04-29 15:12:04 +05:45

radar_transmitter.v

…

range_bin_decimator.v

fix(radar): RX chain corrections, GUI bin alignment, MCU boot ordering

2026-04-23 05:56:52 +05:45

run_regression.sh

test(fpga): receiver-integration — fix tb wiring + skip-guard XSim-only checks

2026-04-29 11:41:40 +05:45

rx_gain_control.v

feat(fpga): integrate 2048-pt FFT upgrade — non-conflicting RTL (wave 1/3)

2026-04-21 01:52:32 +05:45

short_chirp_i.mem

fix(fpga): TX-I — align matched-filter reference with actual post-DDC band

2026-04-29 11:41:19 +05:45

short_chirp_q.mem

fix(fpga): TX-I — align matched-filter reference with actual post-DDC band

2026-04-29 11:41:19 +05:45

usb_data_interface_ft2232h.v

fix(usb): C-9 — GUI bulk-frame parser for FT2232H + clamp inert flag bits

2026-04-29 15:12:04 +05:45

usb_data_interface.v

fix(fpga): TX-N9 — sim-only payload-hold checker on cmd CDC

2026-04-28 10:03:08 +05:45

xfft_16.v

…

xfft_2048.v

feat(fpga): swap matched-filter chain to Xilinx LogiCORE FFT v9.1 IP

2026-04-23 12:39:33 +05:45