latency_buffer.v has had zero non-tb instantiations since RX-B (2026-04-23)
replaced its hookup in radar_receiver_final with a 1-FF alignment register.
The module was being kept "for potential future use" — exactly the kind of
dead weight the codebase does not need. Deleted, along with all build /
test infrastructure that dragged it along:
- 9_Firmware/9_2_FPGA/latency_buffer.v
- 9_Firmware/9_2_FPGA/tb/tb_latency_buffer.v
- run_regression.sh: removed from RTL_FILES and RECEIVER_RTL
- scripts/200t/build_200t.tcl: removed from synthesis source list
- tb/tb_system_e2e.v: removed from header compile-string example
- tb/cosim/validate_mem_files.py: deleted test_latency_buffer() (~75 lines),
its call site, and the corresponding entry in the module docstring
Historical RX-B comments referencing latency_buffer in radar_receiver_final.v,
tb_rxb_fullchain_latency.v, and tb_rxb_latency_measure.v are kept — they
explain WHY the module was removed, which is still useful design archaeology.
Two doc-only housekeeping touches bundled in:
- plfm_chirp_controller.v: replaced two empty "CRITICAL FIX: Generate
valid signal" labels at LONG_CHIRP and SHORT_CHIRP with one shared
chirp_valid policy comment block above LONG_CHIRP that explains the
actual rationale (downstream FIFO underrun on trailing samples).
- v7/models.py: replaced the "range_resolution and velocity_resolution
should be calibrated" docstring (sounded like an open TODO but was a
documented placeholder) with a clear pointer to the GUI-C3 fix in
workers.py:RadarDataWorker so future readers know the live path
derives correct values from WaveformConfig.
FPGA quick regression unchanged: 28/29 (1 fail is the unrelated iverilog/
Xilinx-IP RX-NEW-3 gap). GUI suite 180/180. Ruff clean.
- Add set_false_path -hold for source-synchronous ADC IDDR paths in
adc_clk_mmcm.xdc (eliminates 8 hold violations from build 12)
- Add DDR falling-edge input delay constraints to xc7a50t_ftg256.xdc
(parity with 200T XDC)
- Reorganize scripts/ into target subdirectories: 50t/, 200t/, te0712/,
te0713/, utils/ so users can run the correct build for their hardware
- Delete obsolete build scripts (build17-20) superseded by build_50t/200t
- Update project_root paths in all moved scripts (.. -> ../..)
Jason