mirror of
https://github.com/NawfalMotii79/PLFM_RADAR.git
synced 2026-06-08 14:44:56 +00:00
Jason
ada170ef1f
FPGA (Phase 1+2): - gpio_dig6 (PD14) now carries chirp_scheduler frame_pulse, FPGA-stretched to ~100 ns so the STM32 EXTI on PD14 can latch reliably. - gpio_dig7 (PD15) returns to its pre-PR-AB.b role: control-fault OR (range_decim_watchdog | CDC overrun); MCU stuck-high sampler unchanged. - rx_range_decim_watchdog gains a sticky in source clock domain so a slow status poll cannot miss a 1-cycle assertion (Phase 1). - New tb_dig6_frame_pulse.v (13 checks); tb_status_words_stickies.v extended with DIG_7 fault-OR coverage (14 checks); retired tb_audit_s10_gpio_split.v. - Port comments in radar_system_top.v / _50t.v and XDC roles refreshed. MCU (Phase 3): - PD14 reconfigured to GPIO_MODE_IT_RISING + GPIO_PULLDOWN; new EXTI15_10_IRQHandler in stm32f7xx_it.c dispatches to HAL_GPIO_EXTI_Callback that bumps a volatile g_frame_pulse_count. - runRadarPulseSequence dwell loop replaces 3x HAL_Delay(8) with waitForFramePulse(20) — per-pattern dwell now tracks the actual mask-aware ladder length (drift-free, mask-aware), with a 20 ms timeout safety net. - AGC outer loop is ALWAYS-ON in production (compile-time policy); bench builds compile the body out via -DMCU_AGC_FORCE_DISABLED. The runtime enable/debounce + DIG_6 polling that previously gated AGC are removed. - main.h adds FPGA_FRAME_PULSE_* aliases pointing at FPGA_DIG6_*. GUI (Phase 4): - Settings tab gains a Bench / Diagnostics group with a BENCH-MODE checkbox (off by default, persisted via QSettings). - AGC group header swaps between a green "AGC: ALWAYS-ON" badge (production) and Enable/Disable AGC buttons (bench), pinned to the top of the group. The redundant 0/1 spinbox row for opcode 0x28 is removed — buttons send the same opcode and cannot accept invalid input. - Both the FPGA Control AGC Status box and the AGC Monitor strip share a helper that honours bench-mode in production (always shows ALWAYS-ON in green so the two views never disagree with the badge). - _add_fpga_param_row uses setFixedWidth on label and Set button + explicit stretch=1 on the hint, so all rows align column-wise whether they sit directly in a QVBoxLayout or inside a wrapper QWidget. Regression: FPGA 42/0/0 (PR-M.4 baseline) - MCU 34/34 - GPS extended 51/51 - GUI v7 150/150 - BENCH-MODE flip behaviorally verified. Hardware-blocked steps deferred: bench-scope verify (PD14 dwell pulse, counter advance, PD15 stuck-high recovery still triggers). Closes #182.