feat(fpga,mcu,gui): PR-AB.b — drift-free dwell sync via DIG_6 frame_pulse + AGC always-on policy

FPGA (Phase 1+2):
- gpio_dig6 (PD14) now carries chirp_scheduler frame_pulse, FPGA-stretched
  to ~100 ns so the STM32 EXTI on PD14 can latch reliably.
- gpio_dig7 (PD15) returns to its pre-PR-AB.b role: control-fault OR
  (range_decim_watchdog | CDC overrun); MCU stuck-high sampler unchanged.
- rx_range_decim_watchdog gains a sticky in source clock domain so a slow
  status poll cannot miss a 1-cycle assertion (Phase 1).
- New tb_dig6_frame_pulse.v (13 checks); tb_status_words_stickies.v extended
  with DIG_7 fault-OR coverage (14 checks); retired tb_audit_s10_gpio_split.v.
- Port comments in radar_system_top.v / _50t.v and XDC roles refreshed.

MCU (Phase 3):
- PD14 reconfigured to GPIO_MODE_IT_RISING + GPIO_PULLDOWN; new
  EXTI15_10_IRQHandler in stm32f7xx_it.c dispatches to HAL_GPIO_EXTI_Callback
  that bumps a volatile g_frame_pulse_count.
- runRadarPulseSequence dwell loop replaces 3x HAL_Delay(8) with
  waitForFramePulse(20) — per-pattern dwell now tracks the actual mask-aware
  ladder length (drift-free, mask-aware), with a 20 ms timeout safety net.
- AGC outer loop is ALWAYS-ON in production (compile-time policy); bench
  builds compile the body out via -DMCU_AGC_FORCE_DISABLED. The runtime
  enable/debounce + DIG_6 polling that previously gated AGC are removed.
- main.h adds FPGA_FRAME_PULSE_* aliases pointing at FPGA_DIG6_*.

GUI (Phase 4):
- Settings tab gains a Bench / Diagnostics group with a BENCH-MODE checkbox
  (off by default, persisted via QSettings).
- AGC group header swaps between a green "AGC: ALWAYS-ON" badge (production)
  and Enable/Disable AGC buttons (bench), pinned to the top of the group.
  The redundant 0/1 spinbox row for opcode 0x28 is removed — buttons send
  the same opcode and cannot accept invalid input.
- Both the FPGA Control AGC Status box and the AGC Monitor strip share a
  helper that honours bench-mode in production (always shows ALWAYS-ON in
  green so the two views never disagree with the badge).
- _add_fpga_param_row uses setFixedWidth on label and Set button + explicit
  stretch=1 on the hint, so all rows align column-wise whether they sit
  directly in a QVBoxLayout or inside a wrapper QWidget.

Regression: FPGA 42/0/0 (PR-M.4 baseline) - MCU 34/34 - GPS extended 51/51
- GUI v7 150/150 - BENCH-MODE flip behaviorally verified.
Hardware-blocked steps deferred: bench-scope verify (PD14 dwell pulse,
counter advance, PD15 stuck-high recovery still triggers).

Closes #182.

9_Firmware/9_1_Microcontroller/tests/test_agc_outer_loop.cpp

@@ -50,7 +50,7 @@ static void test_defaults()
     assert(agc.min_gain == 0);
     assert(agc.max_gain == 127);
     assert(agc.holdoff_frames == 4);
-    assert(agc.enabled == false);  // disabled by default — FPGA DIG_6 is source of truth
+    assert(agc.enabled == false);  // class default; main.cpp flips this on under !MCU_AGC_FORCE_DISABLED
     assert(agc.holdoff_counter == 0);
     assert(agc.last_saturated == false);
     assert(agc.saturation_event_count == 0);